Sanitary Negative Pressure Pump Manufacturer

Basic Info

Model NO.	YUY-F
Certification	CE
Installation Method	Horizontal
Power	Electric
Material	Stainless Steel
Working Fluid	Water
Performance	No Leak
Applications	Petrochemical
Motor	ABB Motor
Transport Package	Woodencase
Specification	CE, GMP
Trademark	YUY
Origin	China
HS Code	8414100090
Production Capacity	5000

Product Description

Specifications :
1)Application:Belong to a turbine the diversion centrifugal pump can
extract the liqiud of the vacuum tank under the pressure of negative pressure 0.09Mpa .

2)Spec:3T-180T,0.75KW-75KW
Material:SUS304 SUS316L
the pump body,pump cover,impellerwhich is contact with medium material ,made of stainless steel SUS316L and SUSI304
Standard:DIN, SMS
Impeller:Open type impeller ,semi-close type impeller
Surface treatment:The parts contacted with medium is polished
Working condition;sanitary centrifugal pumps is a high and low level transmission ,as well as the level transmission ,
and has a amount of suction .
The max pressure of inlet:0.5MPa
Temperature range:-10°C to +140°C(EPDM)
washable mechanical sealing:
water pressure:Max 0.1MPa
3)Motor:
1. Configuration of "ABB" brand three-phase AC motor is in accordance with the International Electro-technical CommissionIEC60034.IEC60072 standard design comply with European "CE" marking requirements
2. The explosion-proof motor also available ,that can meet with the requirement of different applications .
3.It with excellent electric performance ,and with low noise,low vibration,
the protection grade is IP55,insulation grade is F.
4 .Operate in voltage:
≤3Kw,220-240V/380-420V,/Y
≥3Kw,380-420V/660-690V, /Y
5.frequency:50Hz/60Hz
6. working method:continuous(SI)
7.rotate speed:the standard rotate speed is 2900r/min
4)Instruction of the YUY sanitary negative pressure pump
For example:
YUY-F- B-2.2- 10- 24- M

Technical Parameters
Flow Medium Parts	AISI304/AISI316L(1.4301/1.4404)
Without Flow Medium Parts	AISI304(1.4301)
Outside Surface	Semi bright
Inside Surface	Polished Ra0.4
Product Wetted Seals	EPDM,Silicone,FPM.NBR
Max.Inlet Pressure	0.5MPA
Temperature Range	-10ºC~140ºC
Noise Level(At 1m)	60-80dB(A)
Capacity	1.5~200ton/hour
Motor	ABB Motor and China motor, Siemens
Voltage	220V,380V,440V,480V,etc
Impeller Type	Closed Impeller, Open Impeller, Semi-Open Type Impeller
Connection ends	Tri clover, butt weld, threaded, union and flange
Mechanical seal(standard)	plumbago&silicon carbide

Specification:	3T-180T, 6m-60m, 0.55KW-75KW
Material:	SS304 SS316L (The pump body, pump cover and impeller)
Impeller:	1.Open type impeller, there is no blind corner;2Close type impeller;3. Semi-open type impeller
Operate condition:	Sanitary centrifugal pump is close to HORIZONTAL transport of high and low level, is not the Self-priming type.
Surface treatment:	The part contact with medium is Polished, And another part is Sand Blasted
Max inlet pressure	0.5MPa
Temperature range:	-10 to Degree +140 Degree
Flushable mechanical sealing:	Water pressure: __Max 0.1MPa Water lift: ___0.25-0.5L/min
Standards:	DIN \ SMS

Certifications

Workshop and Warehouse