Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
Category
Recommended products
Stainless Steel Sanitary Double Seat Mix-Proof Valve with C-Top
Product Name:Stainless Steel Sanitary Double Seat Mix-Proof Valve with C-Top ix-Proof Valve / Double Seat Mix-Proof Valv
Basic Info
| Model NO. | XS-MV003 |
| Position Sensor | 24V DC,NPN/PNP Position Sensor (2) |
| Flow Type | 11model,12model,21model,22model |
| Connection Standard | DIN, 3A, SMS, Rjt, Idf |
| Gasket | EPDM (Standard) in Compliance with FDA 177.2600 |
| Transport Package | Shrink Wrap-Carton Case-Exporting Plywood Case |
| Specification | DIN, SMS, 3A, ISO |
| Trademark | XUSHENG |
| Origin | Made in China |
| HS Code | 8481804090 |
| Production Capacity | 1000sets/Month |
Product Description
Product Name:Stainless Steel Sanitary Double Seat Mix-Proof Valve with C-Topix-Proof Valve / Double Seat Mix-Proof Valve / Mix-Proof Valve with C-Top
Concept:SMP-BC is a sanitary pneumatic seat valve,designed for safety and leak detection when two different productsflow through only one valve.The valve is often used as a part in CIP return lines or other systerms not experiancingpressure spikes offering leakage detection for greater safety.Working Principle:SMP-BC is remote-controlled by means of compressed air.The valve is a normally closed (NC) valve.The valve is fitted with two small pneumatic normally(NO) valves,a detecting valve and a CIP - valve.The valve plug(the upper plug in a change-over valve) has two seals,forming a leakage chamber under atmosphericpressure between them.Leaking products flows into the leakage chamber and is discharged through the detectingvalve.SMP-BC can be cleaned by CIP by supplying compressed air to the actuator(see fig 1).During cleaning of thevalve,flow pattern against the closing direction of the valve plug makes SMP-BC insensitive to water hammer.Technical Data:
| Max.Product Pressure(depanding on valve specification) | 1000kPa(10 bar) |
| Max.product Pressure(depanding on valve specification) | 145 PSI (10 bar) |
| Min Product Pressure | Full Vacuum |
| Temperature Range | 10 ºC~140 ºC(EPDM) |
| Temperature Range | 14ºF~284ºF(EPDM) |
| Air Pressure | 500-800 kPa(5-8 bar) |
| Air Pressure | 72.5-116 PSI(5-8bar) |
Plysical Data:
| Product Wetted Steel Parts | 1.4401(316L) |
| External Surface Finish | Semi-bright(blasted) |
| Internal Surface Finish | Bright(polished),Ra<1.6um |
| Internal Surface Finish | Bright(polished),Ra<64uinch |
| Other Steel Parts | 1.4301(304) |
| Product Wetted Seals | EPDM |
| Other Seals | NBR |
| A | Male parts or clamp liners in accordance with required standard |
| B | Actuator with strong spring |
| C | Larger actuator for valve sizes 38-51mm/DN40-50 |
| D | Larger actuator for valve sizes 1 1/2"-2" |
| E | CIP installation kits |
| F | Other valve body combinations |
| G | Surface roughness,product wetted parts:Ra≤0.8μm |
| H | Surface roughness,product wetted parts:Ra≤32μin |
| I | Product wetted seals of NBR or FPM |
| J | Service tools for actuator |
| K | Tools for plug seals(Necessary for changing the seals. |
| Note | For further details,see also instruction IM 70771 |
We specialize in sanitary valves,pipe fittings and pumps,which is applied for milk,food,beer,pharmaceutical and other fields.We can quote you favourable price&high quality&best after-sale services.Welcome to visit our factory.1.Sanitary Valves,such as butterfly valves,check valves,diaphragm valves,ball valves,pneumatic reversal valves,ect.2.Sanitary pipe fittings,such as triclamp ferrule,elbow,tee,reducer,spray valve,sight glass,strainer,ect.3.Sanitary Pumps,such as Sanitary Centrifugal Pumps,Sanitary Rotary Lobe Pumps4.Sanitary Manhole Covers,such as square/round/elliptical manhole covers
| Sanitary Valves | Sanitary Butterfly Valves |
| Sanitary Check Valves | |
| Sanitary Ball Valves | |
| Sanitary Divert Valves | |
| Sanitary Diaphragm Valves | |
| Sanitary Sample Valves | |
| Sanitary Control Valves | |
| Sanitary Mixproof Valves | |
| Sanitary Pipe Fittings | Sanitary Elbow |
| Sanitary Tee | |
| Sanitary Reducer | |
| Sanitary Cross | |
| Sanitary Triclamp Ferrule | |
| Sanitary Cap | |
| Sanitary Pipe Hanger | |
| Sanitary Tank Cleaning Ball | |
| Sanitary Hose Joint | |
| Sanitary Unions | |
| Sanitary Sight Glass | |
| Sanitary Strainer | |
| Sanitary Manways | Sanitary Round Manway without Pressure |
| Sanitary Round Manway with Pressure | |
| Sanitary Square Manway | |
| Sanitary Oval Manway | |
| Sanitary Pumps | Sanitary Centrifugal Pump |
| Sanitary Lobe Pump | |
| Sanitary Self Priming Pump | |
| Sanitary Tanks | Storage Tank |
| Fermentation Tank | |
| Mixing Tank | |
| Warm-keeping Tank | |
| Sanitary Tube | Seamless Tube |
| Weldless Tube | |
| Sanitary Gasket | Silicone/EPDM Gasket for Triclamp |
| Silicone/EPDM Gasket for Union | |
| Silicone/EPDM Gasket for Butterfly Valve | |
| Silicone/EPDM Gasket for Manhole Cover |
Q1.Are you a trading company or factory?
We are a manufacturing trading integration.
Q2.Do you have Mill test certificate for the materials?
Yes, Mill test certificate is very important for the food processing machines.
Q3.May I have free sample before ordering?
Yes,our company is very pleased to send to you free sample for quality test as long as freight cost being paid by buyers themselves.
Q4.What's the payment terms?
For small testing orders,we accept Paypal,Western Union,T/T and credit Card.
For mass orders,we accept T/T and L/C.
Q5.How do you control the quality?
Quality control is very important to avoid material mixing and poor quality.If you need inspection report,we will send you in excel file to show real photo.
We control the quality from beginning to the end.We only have 304 and 316L two different materials.100% inspection on raw material.During production,different materials in different place.After materials are finished,we choose 10%for inspection.If there is 0.1% problem in 10%,then no excuse to go ahead for inspecting 100%of the materials.
Q6.If there is any quality problem,how do you solve it?
We are proud that we never let one customer leave us.We are not 100%perfect,there is some quality problem.We try our best to provide the correct materials in the beginning,so we need less time for quality problem.If there is any quality problem,we take the responsibility.We believe what we are doing together,it will get back tomorrow.If we leave our responsibility,customer will leave us.If we always take our responsibility,we keep our customers with us.
Q7.How long is your delivery time?
For normal production in 7-10days.For bulk order in 15-25days.
Q8.Warranty
One year warranty for all of our stainless steel products.Gaskets are not included due to the different application for customers.